pJkatich wrote:Great set-up Ron!
Are you firing to ^10? That's what it looks like based on the cone packs.
Thanks Paul, yes the last three cones standing are 10,11 and 12. Cone 10 was just starting to bend when I quit stoking the wood. You can see the front set of cones on the middle shelf all completely flat. They were 5, 7 and 9. So this firing was a full cone 9, purposely a little less then the full 10, that I usually fire. Some of the glazes were getting a little too fluxed, too shiny in recent firings. So I tried a little cooler in this one. I've fired two kilns since this one and I am back to the full cone 10 and am more selective about where in the kiln I place certain glazes to take advantage of cooler firing areas.